• <em id="ggmlm"></em>
  • <em id="ggmlm"><label id="ggmlm"></label></em>

    <em id="ggmlm"><label id="ggmlm"></label></em>
  • <em id="ggmlm"></em>

      您的位置:首頁 > 新聞資訊 >


      來源:http://www.mallhometrade.com  發布時間:2022-05-10 23:07:32  

      Aluminum plate is a high-quality building material and a relatively environmentally friendly material. It is widely used in engineering decoration, home decoration, communication electronics, transportation facilities, thermal insulation and anti-corrosion, fine decoration, automobile manufacturing and other fields. What are the knowledge points in use?
      Aluminum plate storage: it should be stored in a dry and ventilated place and placed flat on the surface. Do not step on or hit it. Handling of aluminum plate: the four sides of the aluminum plate shall be lifted at the same time to avoid scratching the plate surface.
      Aluminum plate slotting: when slotting with slotting machine or gong machine, semi-circular end milling cutter shall be used. No matter whether the damage to the aluminum plate is too deep, not too shallow and not easy to fold, the rubber core with a thickness of 0.2-0.3mm shall be bent together with the aluminum plate to increase the strength and toughness, otherwise the aluminum plate may break or the paint film may break when it is bent.

      Aluminum plate batch: different batches of aluminum plates of the same type may have color difference. Color difference comparison procedures should be added when selling and using different batches of paper. Our company is mainly engaged in aluminum alloy plate, aluminum pattern plate, etc. It can only be used on the same plane without visual color difference.
      Installation direction of aluminum plate: when aluminum plates of the same color are installed on the same plane, the flow direction shall be consistent, otherwise there will be visual color difference. Aluminum plate film tearing: tear off the protective film within 45 days after aluminum plate installation, otherwise it is difficult to tear the film or glue transfer occurs. Service conditions of aluminum plate: the indoor wall plate shall be used indoors and shall not be installed outdoors to ensure the service effect and service life.
      Bending of aluminum plate: the force is uniform when folding. It is formed at one time. Do not bend repeatedly, otherwise the aluminum plate may break. Aluminum plate arc processing: aluminum plate manufacturers remind everyone that special bending equipment should be used when processing arc, so that the plate can gradually reach the required surface and can not be bent at one time.
      I believe that through the introduction of the above contents, we have a certain understanding of the knowledge points of aluminum plate use. If you want to know more about the content points, you can pay attention to our website www.jndclyyxgs com。